+380673518665
lutskplast@gmail.com
lutskplast@gmail.com
+38 067 351 86 65
lutskplast@gmail.com
lutskplast@gmail.com
POLYMER STORMWATER CANNELS
- Stormwater channels are designed for collecting and diverting surface runoff water during rain and snowmelt. They prevent flooding, protect roads, sidewalks, and buildings, and ensure traffic safety.
- They are used on highways, parking lots, pedestrian zones, and industrial sites.
- They consist of a body and a cap and can be equipped with a revision chamber.
- Finished products are fully recyclable, ensuring environmental safety.
- Products are properly certified and have successfully passed technical tests in Ukraine.
STORMWATER CHANNEL / С250 / 25 Т
Max Load: 25 tons
Size: 1000*140*140 mm
Passage Hole Diameter: 100 mm
Total Weight: 8 kg
Construction: Monoblock
Size: 1000*140*140 mm
Passage Hole Diameter: 100 mm
Total Weight: 8 kg
Construction: Monoblock
- We are open to providing information regarding pricing, delivery terms, and any other issues in response to your request.
- Please refer to the link below.
STORMWATER CHANNEL WITH A REVISION CHAMBER / С250 / 25 Т
Max Load: 25 tons
Size: 1000*140*140 mm
Passage Hole Diameter: 100 mm
Total Weight: 8 kg
Construction: Monoblock with a Revision Chamber
Size: 1000*140*140 mm
Passage Hole Diameter: 100 mm
Total Weight: 8 kg
Construction: Monoblock with a Revision Chamber
- We are open to providing information regarding pricing, delivery terms, and any other issues in response to your request.
- Please refer to the link below.
CAP FOR A STORMWATER CHANNEL / С250
- We are open to providing information regarding pricing, delivery terms, and any other issues in response to your request.
- Please refer to the link below.
- Curbed Zone of Highways: Stormwater channels are installed along the roadway of high-traffic roads. They efficiently collect and divert rainwater and meltwater into the drainage system, preventing flooding.
- Parking Lots and Car Parks: Stormwater channels ensure surface water drainage on large areas with heavy vehicle loads, preventing water accumulation and damage to the surface.
- Industrial and Pedestrian Zones: Used for drainage in areas with high vehicle and pedestrian traffic, maintaining cleanliness and safety.
- Private Properties: Ideal for stormwater drainage in yards, gardens, and driveways, protecting foundations and landscapes.
- It consists of a body and a plug.
- The body is structurally a monolith.
- The product can be equipped with an inspection device.
- Polymer stormwater channels are made from a special high-strength composite material based on high and low-density polyethylene, class C250.
- The polymer is resistant to ultraviolet (sunlight) radiation, does not corrode, and does not freeze in winter.
- The operating temperature ranges from minus 50 to plus 50 degrees Celsius.
- It easily withstands any dynamic and static loads.
- The products do not sink in water.
- They are fully recyclable, ensuring environmental safety.
- Lightweight: The low weight ensures easy installation and operation without the need for specialized assembly.
- Economical: The cost of polymer stormwater channels is significantly lower compared to similar products made from other materials.
- Safety: Built-in revision devices provide additional protection against damage.
- Durability: The channels are resistant to ultraviolet radiation, do not corrode, and do not freeze in winter. The guaranteed service life is from 30 to 40 years.
- Aesthetic: With their stylish design, the products easily integrate into landscape design, performing both functional and aesthetic tasks.
- Eco-friendliness: Polymer stormwater channels are made from composite materials, allowing them to be fully recyclable, making the products environmentally clean and safe for the surrounding environment.
Warranty period: 10 years.
Polymer stormwater channels are certified and comply with Ukrainian and European standards, specifically:
Polymer stormwater channels are certified and comply with Ukrainian and European standards, specifically:
- DSTU B V.2.5-26:2005
- TU U 25.2-31642900-004:2009
- EN 124-6:2015
Do you have a question? Write to us!
You agree to our Privacy Policy when clicking the button
© HYDROGASCOMPLECT
PRODUCTS
CONTACTS
+38-067-351-8665
+38-033-224-1566
lutskplast@gmail.com
+38-033-224-1566
lutskplast@gmail.com
LOCATION
Company Hydrogascomplect,
44 Ivan Franko str,
Lutsk 43000
Ukraine
44 Ivan Franko str,
Lutsk 43000
Ukraine